Detailed Product Description
Compressed air is polluted with dirt particles, water, oil, oil vapor and condensate.
These contaminants result in high maintenance costs, premature wear, spoiled
products and the failure of control systems. This regenerative twin-tower dryer
will effectively remove these contaminants.
The adsorption principle used in this design is simple, robust and flexible. Continuous
drying is accomplished by the operation of 2 desiccant towers. Compressed
air is dried through one tower while the other desiccant tower is being regenerated.
The regeneration heating cycle of the desiccant is accomplished using a dry
air purge flow heated by an external electric heater. The regeneration cooling
cycle is performed using the same flow of dry compressed air taken from the dryer
outlet to ensure accurate dew point performance.
By using proven engineering technology and components, this equipment is extremely
reliable.
Features:
1) Low running cost, low pressure drop and steady dew point
2) Easy to install and maintain
3) Ideal for high environmental temperatures
4) Microprocessor control
5) Suitable for a range of air compressors
6) Custom designs welcome
Specifications:
1) Constant pressure dew point: -40°C, -70°C
2) Rated operational pressure: 0.60 - 0.95Mpa(g)
3) Regenerative consumption: <3%
4) Inlet air temperature: ≤40°C
5) Desiccant: activated aluminum oxide or molecular sieve
6) Power supply: 380V AC, 50Hz
7) Pressure drop: ≤0.035Mpa (working pressure: ≤0.7MPa)
8) Fully automatic, interlocked operation controlled by PLC on a fixed 10min
time cycle
9) End connection/flange: JB/T81
