Detailed Description
YINOX 1098
N,N-hexamethylene bis (3-(3,5-di-t-butyl-4-hydroxyphenyl) propionamide)
C40H64N2O4
CAS NO. 23128-74-7
Typical Properties
Appearance White powder
Molecular weight 637
Specific Gravity @ 20 C, g/ml 1.04
Melting range, °C 156 - 162
Flash point, °C 280
Thermogravimetric Analysis (10 mg @ 10 C/minute under N2)
Weight Loss, % 5 10 25
Temperature, C 330 342 375
Solubility @ 20°C(Weight %)
Hexane 0.01 Ethyl acetate 1.2
Acetone 2.8 Methanol 6.0
Benzene 0.01 Water 0.01
Chloroform 6.6 80% Caprolactam - 3
20% water
YINOX 1098 is recommended for use in polyamide molded articles, fibers, and films at
concentrations of 0.05-1.0% depending on the polymer type, method of incorporation,
application, and degree of stability required. It is easily dispersed into the polymer by conventional extrusion compounding techniques. The product may be incorporated during the polyamide polymerization at concentrations of 0.05-0.20% to provide protection of polymer color properties in subsequent fabrication, spinning, or finishing operations. When YINOX 1098 is incorporated prior to or during the polyamide polymerization, reaction conditions and chain terminator concentration may require adjustment to
compensate for the presence of the antioxidant. Suggested use concentrations for YINOX 1098 in polyacetals, polyesters, polyurethanes,saturated and unsaturated rubbers range from 0.05-0.5% depending on the substrate and the stability required. The product can be used in combination with other additives such as costabilizers (e.g. phosphites, thioethers, hydroxylamines, lactones), light stabilizers (e.g. ultraviolet absorbers,hindered amines), and other functional stabilizers.
