Split Solar collector heatpipe
Detailed Description
We are the manufacturer and exporter of non-pressure series solar water heaters, pressurized series solar water heater, solar collector U pipe with solar keymark, solar collector heat pipe, All-glass evacuated solar collector tubes.
Split Solar collector heat pipe with solar keymark certtificate.
This product is the solar collector heat pipe.
The characteristic of this Heat Pipe Collector:
1) The water is heated by the heat pipe rapidly.
2) There is no water in the vacuum tube,so the tube will not break in the winter.
3) It can be combined with the architecture perfectly.
4) It can be combined with existing pipeline.
5) It will be affected by the local water quality,it doesn't suit hard water.
6) It can be still operate in the event of occasional tube breakages.
The material of this heat pipe collector:
1) Outer tank:Coated galvanized steel--0.8mm;Alnico--1.5mm.
2) Mabifold:Ø38mm thickness 2mm.
The details of this Heat Pipe Collector
Type Area( ㎡ ) Vacuum tube Qty(pcs) Length/Width/Height(mm) Gross wet(kg)
TZ58/1800-10R 1.31 10 2020 × 995 × 155 39.9
TZ58/1800-15R 1.97 15 2020 × 1410 × 155 58.3
TZ58/1800-20R 2.62 20 2020 ×1825 ×155 77.1
TZ58/1800-25R 3.49 25 2020 ×2240 ×155 96.1
TZ58/1800-30R 3.93 30 2020 ×2655 ×155 114.1
Remark:vacuum tube size: Ø58 × 1800
The Principle of this Heat Pipe Collector can get from us.
The special advantages of solar thermal collector heat pipe:
1. New manifold, more stronger
2. The frame can be adjusted
3. Easy installation
4. Tail stock support is made of Alnico
Key words:solar collector U pipe, solar collector U pipe with solar keymark, solar water heater, split solar thermal collector, solar water heater collector, solar energy, all-glass evacuated collector tube.
